Today's a big day.
Fiberglassing.
Joining.
And I can't decide: inside or outside?
The weather's going to be beautiful for the next 14 hours, but goes downhill after that.
There is just room in the basement, but getting the joined pieces back upstairs is going to be a matter of fractions of an inch.
What
To
Do?
*** UPDATE **
The die is cast.
Outside it is.
Cross your fingers.
skip to main |
skip to sidebar
31 hours, 47 minutes
4/18 - 45 min: joined rub rails and glued ribs
4/19 - 1 min: broke both rub rails
4/24 - 45 min: cut four 10" sides
4/24 - 30 min: re-scarfed rub rails (6":3/4")
4/25 - 15 min: sanded and glued rub rails
4/28 - 6 min: glued 4th rib
5/1 - 1 hr, 50 min: joined plywood sheets
5/2 - 3 hr, 30 min: sanded, re-glassed sheets
5/4 - 45 min: sanded sideboards
5/8 - 20 min: cut sideboards, broke sideboard
5/9 - 2 hr, 40 min: attached stringers
5/14 - 1 hr, 15 min: re-attached stringers
5/15 - 45 min: attached stemposts
5/16 - 4 hr, 20 min: attached ribs, rubrails
5/22 - 3 hr, 15 min: attached bottom
5/23 - 3 hr, 45 min: sanded
5/26 - 3 hr, 15 min: fiberglassed hull
5/28 - 3 hr: glassed inside edges, sanded
5/28 - 45 min: final epoxy exterior
Blog Archive
-
▼
2010
(65)
-
▼
May
(25)
- Maiden Voyage
- Launch Day
- Finished Boat
- Friday Cleanup, Pt. 1
- Fiberglassing Sucks
- So Close
- Question for Fred
- Big Day
- I Dill It
- It's All in My Head
- Edging Nearer
- We Are Approaching Boat Status
- Crazy Re-Do Guy
- What's in a Name?
- Progress
- Quaere
- Starting Over
- Why Me?
- Thoughts on a First Voyage
- Other Boats
- Blood and Bad Words
- Progress Continues
- Limited Success?
- Joining with Fiberglass
- Day of Truth
-
▼
May
(25)
Areas of Interest
- Construction (17)
- Fred (17)
- fiberglassing (9)
- Sail plan (8)
- Setbacks (5)
- Mary (4)
- Samurai (4)
- Support (3)
- Voyages (3)
- Phillies (2)
- Ship's Log (2)
- Old Sparkey's Forum (1)
- videos (1)
Links
Search This Blog
Total Build Time
4/18 - 45 min: joined rub rails and glued ribs
4/19 - 1 min: broke both rub rails
4/24 - 45 min: cut four 10" sides
4/24 - 30 min: re-scarfed rub rails (6":3/4")
4/25 - 15 min: sanded and glued rub rails
4/28 - 6 min: glued 4th rib
5/1 - 1 hr, 50 min: joined plywood sheets
5/2 - 3 hr, 30 min: sanded, re-glassed sheets
5/4 - 45 min: sanded sideboards
5/8 - 20 min: cut sideboards, broke sideboard
5/9 - 2 hr, 40 min: attached stringers
5/14 - 1 hr, 15 min: re-attached stringers
5/15 - 45 min: attached stemposts
5/16 - 4 hr, 20 min: attached ribs, rubrails
5/22 - 3 hr, 15 min: attached bottom
5/23 - 3 hr, 45 min: sanded
5/26 - 3 hr, 15 min: fiberglassed hull
5/28 - 3 hr: glassed inside edges, sanded
5/28 - 45 min: final epoxy exterior
About the Name
While I have chosen "Ruddy Duck" for the actual name of the boat, I felt it needed a little bit more for a proper formal title.
So I went back to naval history (specifically the Royal Navy), and found that ships generally had an abbreviated description of the service to which the ship belonged, then a description of the vessel type, and then the name itself.
For example, HMS Frigate Boadicea would belong to His Majesty's Service (i.e., in the Royal Navy), would be a frigate-class ship (38 guns), and be called the Boadicea.
Privateers, which were ships licensed by the King to attack enemy vessels but were not part of the navy proper, were signified "HMHV": His Majesty's Hired Vessel.
I have taken that to the next (logical) step to come up with the designation "PV": Private Vessel.
As for the class my boat belongs in, I don't know that there is one: It's no doubt a pirogue (flat-bottomed, double-ended canoe), but it will eventually sport a single-mast square sail and, perhaps, a transom. I doubt any such vessel has ever existed in the history of boat building.
So I determined it is a new class, the Merganser class. This is in tribute to Fred, in gratitude for all of his invaluable help on this project. (Fred had proffered the name "Merganser" or "Smew" for the boat, when I was casting about for names.)
A merganser is a fish-eating seaduck, although almost all mergansers live in and on rivers rather than the sea. While a Ruddy Duck is not technically in the merganser family, I thought it was close enough.
So, the offical name of The Boat is PV Merganser Ruddy Duck.
No comments:
Post a Comment